Thanks in advance Felipe Hi again Ok i get the files from the "apc ftp server" but now i have a problem Can someone help me at this? SMT1500 firmware update | Smart-UPS & Symmetra LX / RM
How do I fix this? You will then be able to fix the firmware issue. The upgrade utility should install the aos and application make sure you have the correct firmware package for the type of device the AP is installed in and you should be all set.Įncountered 1 failures during upgrade.
How do you normally access the card - via the web interface, SSH, or the console? You could use the console cable that came with the card to connect to it and enable FTP for the duration of the upgrade utility's operation. Why does the upgrade utility not check to see if the FTP facility on the card is running, before blowing away the web interface? I'm not sure how what you described could happen - the upgrade utility transfers the images via FTP, and if you have turned FTP off, the upgrade utility should fail without making any changes to the card. I got it, i did it twice uploaded files by ftp and firmware installerit worked with the ftp server. When you log into these devices via telnet or serial, on the top right of the initial page, which AOS version do they have? If so, FTP the application file to the card only. If this does not work properly, which it seems like the v3. When you use the wizard, it knows to go from v1. Ok i get the files from the "apc ftp server" but now i have a problem I made the upgrade through the firmware installer and then by the ftp, because i read a post with that issue "Error: the application was not able to load" And also i upgrade another NMC through my network and happens the same! When you extract that.
0 kommentar(er)
